Leak Detection Plumber Olympia

Home » Leak Detection Plumber Olympia» Leak Detection Plumber Olympia | Ways to Find

Do you have pressure loss in the water pipe or heating pipe? Is it dripping from the ceiling? Is the wall damp? Let the Leak Detection Plumber in Olympia, Washington help you with the leak detection. Whether with the thermal imaging camera, with the pipe camera, with test gas, by ultrasonic measurement, the pressure of the water pipe with water, find leakage, locate pipe breakage, water loss in the heating system, etc. We are happy to help. Leak Detection Plumber Olympia

Are we close to you?

Our mechanics drive in the emergency service directly from home to you, i.e. there our mechanics live in Olympia, Washington, as well as in the surrounding area, save you thereby costs with the arrival and departure. But also, in the normal daily events are close to you!

Water stains on the wall or ceiling?

Even with small leaks, the consequential damage (water damage) is enormous. It is often the case that smaller leaks only come to light with a long-time delay, sometimes in completely unexpected places. Through cavities in the structure of the building, the water looks for the easiest way. Tiles in particular “hide” the obvious signs of a leak. We can help here too!

Pipe burst Leak detection

Leak detection/pipe break detection for water-bearing pipes, wastewater pipes, heating pipes, water stains on the ceiling? Gas line leak? Has water pipe frozen?

Leak detection, water loss in the heating system

In the event of a leak, the heating must be switched off and the entire pipeline emptied. This is not a problem in summer, but in winter, when it’s freezing outside? Afterward, craftsmen lift walls, ceilings, and walls and turn a home into a field of rubble. There is not even a guarantee that the leak will be found in this way. This scenario does not have to be, we carry out leak detection with the help of state-of-the-art technology and thus help to save costs. Leak detection always serves one goal: cost reduction. Because only through the precise location of a leak can a high-quality and professional remediation be realized at the lowest possible cost. This not only saves money but also noise, dirt, and trouble.

Leak detection by a moisture meter

With the help of modern ultrasound localization, we also tackle hidden leaks. In this way, we avoid unnecessary wall openings in the search for the leak. This way we can reduce annoying construction work, combined with dirt and noise, to a minimum. Talk to us! We help fast, clean and around the clock – with a hydrometer (moisture meter) moisture in walls, ceilings, floors, and chimneys can be measured nondestructively. The moisture meter can greatly limit the location of leaks by the degree of moisture, e.g. in the case of pipe burst location, leaking waste water pipes. Where a pipe bursts or the sewage pipe leaks, our pipe service can seal the sewage pipe or repair the pipe break with minimal damage.

In the case of a soaked chimney, it is possible to use a special hydrometer to measure the moisture content after, for example, water damage or sooting in the chimney after the chimney sweeper has burnt it out. After sooting, it is recommended to have a chimney renovation carried out. This type of measurement is called water content measurement method.