Clogged Toilet Olympia | How to Unclog

Home » Clogged Toilet Olympia» Clogged Toilet Olympia | How to Unclog

If you’re having this problem with a clogged toilet in Olympia, Washingon and you can afford to wait for help, then take your time looking for a reliable plumbing company. However, if you can’t seem to find an available Washington plumber at the moment, don’t fret. In this article, we’ll walk you through five different methods used by many blocked toilet plumbers for getting rid of clogs. Clogged Toilet Olympia

Use a Plunger

Align the plunger so that it completely covers the hole in your toilet. Make sure that your plunger is covered by a few inches of water. Start pumping the plunger by applying pressure lightly, building up the speed and intensity as you go. Then, break the seal by quickly pulling the plunger up. If you’re successful, the water should go down the drain easily enough. If not, pump a few more times until the water eventually drains.

Use a Plumbing Snake

Sometimes a plunger isn’t enough to do the trick. In cases like this, you need to push the blockage out of the way using a plumbing snake. Feed the wire end of the snake into the drain, extending it further and further until you feel the clog. Twist and push the snake around to break up the obstruction into smaller pieces. This will allow the clog to move more easily through the pipes. If done correctly, the water should begin to drain.

Use an Enzyme Product

If plunging or snaking doesn’t help, you might have to resort to using an enzyme waste removal product. These products are specially formulated in order to liquify waste materials. Pour only the recommended amount of the product into the toilet bowl. Afterward, let the solution work overnight so that it can properly break down the obstructing materials.

Use a Homemade Drain Cleaner

First, heat up a pot of water and take it off the heat right before it boils. Then, pour in some baking soda and vinegar into the toilet bowl to dissolve the obstruction. If you don’t have those two ingredients, you can use a few squirts of dish soap instead. Next, pour the hot water into the bowl. The force of the falling water should be strong enough to clear the obstruction. If not, leave the solution or dish soap in the bowl overnight to let it work its magic.

Use a Wet-Dry Vacuum

This may seem like a crazy idea, but surprisingly, it can work wonders on blocked toilet plumbing. First, use the vacuum to empty the water inside the toilet bowl. Next, work the end of the vacuum hose into the drain without using any vacuum attachments. Wrap a towel around the hole, pressing down on it to create a good seal around the drain. Once that’s done, turn on your vacuum in order to suck out the clog.

We hope that at least one of these methods helped you successfully get rid of the Clogged toilet in Olympia, Washington. But if your toilet just refuses to cooperate, it may be time to call up plumbers in Olympia, Washington. A professional plumbing service in Olympia, Washington can better diagnose the problem and figure out a solution that works for you.